| Model No. |
RX-50K |
| Voltage |
3.7V DC (rechargeable lithium-ion battery) |
Continuous
operation time |
Approx. 50 hours (in the standby state)
*More alarm operation shortens available operation time. |
| Charge time |
Power supply OFF: Approx. 8 hours
Power supply ON: Approx 10 hours |
Operating
frequency band |
426MHz
(wireless equipment of low power security system) |
| Antenna |
Helical antenna |
| Coverage distance |
Approx. 100m (line-of-sight distance) |
| LED display |
Displayed when the alarm or error occurs (including the memory
function)
Displayed during operation, such as registration, cancellation, inspection, or check.
(Backlight ON for 10 sec. after key operation) |
Alarm/charge
indicator |
2-color LED
Alarm/tamper reception: Red light blinks
During charge: Red light ON
Charge completion: Green light ON |
| Built-in buzzer |
Alarm (tamper) activation: “Pi-pi-pi-pi” for 20 sec. (Off delay operation)
The sound volume can be set in 4 steps, “High”, “Middle”, “Low”, and
“Silent”.
Each key operation: Beep
Inspection mode: Pu
Registration error: Bu
Sound volume fixed |
| Vibrator function |
Alarm (Tamper) activation:
Operates when the sound volume is set to “Silent”. |
Alarm contact
output (General) |
Alarm (Tamper) activation:
Dry semiconductor output, N.O activates.
(Open drain output 5V DC, 30mA or less, With polarity)
Output duration: Approx. 20 sec (Off delay operation)
Synchronizes with the contact status of the transmitter, when receiving the tamper signal or that from maintainance type transmitter
(contact input transmitter) |
Alarm output
function |
Alarm (Tamper) activation:
Alarm sound “pi-pi-pi-pi”
is output from the output terminal |
Allowable number
of
registered transmitters |
50 units |
| Body tamper |
Not available |
| Memory function |
Available
(Cleared when the power is turned OFF.) |
Ambient
temperature range |
0ºC to +45ºC |
| Weight |
Approx. 84g |
| Appearance |
ABS resin (pearl silver coating) |
