| Model No. |
RX-10 |
RX-10A |
| Voltage |
10 to 28V DC
(with polarity) |
100V AC 50/60Hz |
| Power/ Current consumption |
100mA |
2W |
| Operating frequency band |
426MHz band
(wireless equipment of low power security system) |
| Coverage distance |
Approx. 100m (line-of-sight distance) |
| Antenna |
λ/4 whip antenna |
| Contact output |
Alarm: Dry relay contact N.O. / N.C. selectable |
| Contact capacity |
100V AC 500W max. (incandescent lamp load)
30V DC 5A max. inductive load |
| Alarm output timer |
3/10/30/60 sec. /2/3/5 min. / Continuous
(Off delay operation)
Retained until the power is turned OFF, when [Continuous] is set. |
| Indicator |
Power ON: Green light ON
Battery exhaustion: Green light blinks
Reception:
Red light ON (synchronized with the alarm output)
Lack of reception sensitivity:
Red light blinks (for approx. 3 sec. after reception)
Registration mode:
Red and green lights ON alternately. |
Allowable number of
registered transmitters |
30 units |
| Wiring |
With the cab tire cable (5m) |
Ambient
temperature range |
-10ºC to +50ºC |
| Weight |
Approx. 950g
(including cable) |
Approx. 1,000g
(including cable) |
| Appearance |
AES resin |
