|
|
RX-450-S
- Up to 30 transmitters can be assigned into four groups and registered.
- Outputs by channel, when receiving the radio wave from each transmitter.
- Provides the digital display of the registration no. on the 7-segment LED when receiving theradio wave from each transmitter.
- When receining the battery exhausting signal from a transmitter, an internal buzzer rings.
- Designed to intergrate the new type controller (C-602/603/606), and looks excellent if installed side by side.
Contact output
(Dry semiconductor contact 30V AC/DC, 0.25A)
|
Individual output x 4 |
N.O / N.C. individual selectable |
Battery exhaustion alarm output
Tamper output
Regular transmission output
|
N.O./N.C.
collectively selectable
|
| Model No. |
RX-450-S
|
| Voltage |
100V AC 50/60Hz or 10 to 18V DC |
| Power/ Current consumption |
5W or 280mA max. |
| Operating frequency band |
426MHz band
(wireless equipment of low power security system)
|
| Coverage distance |
Approx. 100m (line-of-sight distance) |
| Antenna |
λ/4 whip antenna |
| Contact Output |
Alarm output Cntact
Contact type: Drycontact N.O. / N.C. individual selectable
Contact rating: 30V AC/DC. 0.25A x 4 (CH1 to CH4)
Error output
Contact type: Dry contact N.O. / N.C. collectively selectable
Contact rating: 30V AC/DC, 0.25A x 3
(Tamper, battery exhaustion, regular transmission)
|
| Alarm Sound |
Buzzer sound:
Beep (Rings to notify battery exhaustion)
Sound Volume: Fixed
Operation: Rings every 20 seconds until recovery |
| Allowable number of registerd transmitters |
30 units |
| Data storage function |
Available |
| Wiring |
Terminals |
| Mounting position |
Indoor (wall mount type) |
| Ambient temperature range |
-10°C to +50°C |
| Weight |
Approx. 1,100g |
| Appearance |
ABS resin (white) |
|
